The lower edge of any roof is one of the most critical areas for overall roof performance and wind resistance.
To get the best performance from your IKO roof, and to ensure your roof system is installed in compliance with one of the requirements for the high wind resistance limited warranty protection, start your roof installation with one of IKO’s premium roof starters. Installed below the first row of shingles, and along roof rake edges, roof starters literally get your roof started in the right direction.
If you have selected IKO’s Armourshake shingles for your roof, you will need to use IKO Armour Starter. Used in conjunction with our standard Leading Edge Plus starter, Armour Starter provides extra thickness and protection between the shingle tabs of the first course of Armourshake, ensuring a beautiful roof appearance from bottom to top.
Regardless of the shingle used on your roof, you will need some type of starter shingle. Leading Edge Plus is the ideal product to use. Its efficient use of material provides two pieces from every shingle strip, easily separated along a factory-perforated line. IKO’s own high-strength thermally activated sealant is on every strip, helping ensure wind resistance at that critical first course of shingles.
IKO EdgeSeal roof starter is highly recommended to help prevent wind uplift and blow-off in the critical areas where shingles are most vulnerable – the roof perimeter along the eaves and rakes.
Peel the no-stick release film and stick down the IKO EdgeSeal to bond the drip-edge, ice and water membrane and first course of shingles to create a unified barrier against Mother Nature. IKO EdgeSeal comes in 67 foot rolls, to go down easy and fast!
The information on this website is subject to change without notice. IKO assumes no responsibility for errors that may appear on this website.
IKO strives to accurately reproduce the screen images of the shingle swatches and house photos shown. However, due to manufacturing variances, the limitations of your monitor resolution and the variation in natural exterior lighting, actual colors may vary from the images you see. To ensure complete satisfaction you should make final color selections from several full size shingles and view a sample of the product installed on a home. Please refer to our Legal Notices for U.S.A. or our Legal Notices for Canada.
Location set to view all.
IKO manufactures products for specific areas in North America.
To ensure we feature the products available in your area, please select your country and state/province.